CK100 Program Nissan Sentra key via OBD

Here is the instruction on programming new key for U.S. made Nissan Sentra from 2007 to 2012 year NATS 5 models by using CK100 V45.02 CK-100 key programmer.

Note:

CK-100 V45.02 is new update to V45.09 which is verified to be working version as well asCK100 v45.06.

Nissan Pin Code is required when program new keys.

Instruction:

Connect CK-100 auto key programmer with vehicle via OBD socket

Check software and firmware information

Check battery status

Password saved

Select IMMOBILIZER function from Main Menu

Select vehicle brand and region: Nissan USA Select vehicle model: Sentra (IK) 07-12

CK100 will prompt how many token left

Select the Nissan fuel type gasoline or diesel, here we choose gasoline

Insert a key and turn ignition ON

We note that the warning light stays signal indicating key is not programmed

Select Nissan USA NAT system: NATS 5

Select Program New Keys Without pin code you cannot program new keys.

Enter 4-digit pin code. You can pull out pin code by Nissan NSPC001 OBD2 pin code reader.

Turn ignition OFF Insert keys to be programmed in sequence and turn them ON and OFF for 5 sec respectively. In the end start the engine for some sec. Press any key…

Is the procedure successfully ended? press No

We select No to not spend tokens in ck-100

We note that the indicator was off indicating that the key has been programmed successfully.

Test the new key.

http://obd365.blogrip.com/2016/09/21/ck-100-v45-02-program-nissan-sentra-nats-5-key/

#ck100 #ck100 #ck100keyprogrammer